To figure out whether or not your wood floors are finished in the same way as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction middle suggests these tests: First is govern your hand more than the wood. If you can character the texture of the grain, the Rubber Flooring Houston has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, mixed in the same way as additives for drying) topped in the same way as wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, in the same way as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Rubber Flooring Houston is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are unquestionable in the same way as wax. To separate the white spots, use a piece of fine steel wool lightly dampened in the same way as wax and smear gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unquestionable in the same way as one of the older finishing methods, it will flake off.