To figure out whether or not your wood floors are the end behind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is manage your hand greater than the wood. If you can atmosphere the texture of the grain, the Rubber Flooring Indonesia has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, infected behind additives for drying) topped behind wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, behind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Rubber Flooring Indonesia is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after very nearly 10 to 15 minutes, the floors are sealed behind wax. To sever the white spots, use a piece of fine steel wool lightly dampened behind wax and smooth gently. The last is if you suspect a varnish or shellac, receive a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sealed behind one of the older deed methods, it will flake off.