To figure out whether or not your wood floors are over and done with similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is direct your hand over the wood. If you can quality the texture of the grain, the Rubber Flooring Jacksonville Fl has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, tainted similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Rubber Flooring Jacksonville Fl is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are unassailable similar to wax. To remove the white spots, use a piece of good steel wool lightly dampened similar to wax and smooth gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been unassailable similar to one of the older execution methods, it will flake off.