To figure out whether or not your wood floors are done behind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is manage your hand greater than the wood. If you can tone the texture of the grain, the Rubber Flooring Kerala has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, contaminated behind additives for drying) topped behind wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, behind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Rubber Flooring Kerala is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are sealed behind wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened behind wax and daub gently. The last is if you suspect a varnish or shellac, receive a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been sealed behind one of the older carrying out methods, it will flake off.