To figure out whether or not your wood floors are finished taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is run your hand greater than the wood. If you can environment the texture of the grain, the Rubber Flooring Northern Ireland has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, poisoned taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Rubber Flooring Northern Ireland is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are solid taking into consideration wax. To separate the white spots, use a piece of fine steel wool lightly dampened taking into consideration wax and rub gently. The last is if you suspect a varnish or shellac, say you will a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been solid taking into consideration one of the older achievement methods, it will flake off.