To figure out whether or not your wood floors are the end subsequently a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is rule your hand beyond the wood. If you can environment the texture of the grain, the Rubber Flooring Quebec has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, polluted subsequently additives for drying) topped subsequently wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequently polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Rubber Flooring Quebec is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after roughly 10 to 15 minutes, the floors are strong subsequently wax. To cut off the white spots, use a piece of fine steel wool lightly dampened subsequently wax and massage gently. The last is if you suspect a varnish or shellac, consent a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been strong subsequently one of the older attainment methods, it will flake off.