To figure out whether or not your wood floors are the end next a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is run your hand more than the wood. If you can air the texture of the grain, the Rubber Flooring Rolls Lowes has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, unclean next additives for drying) topped next wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, next polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Rubber Flooring Rolls Lowes is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are sound next wax. To sever the white spots, use a fragment of good steel wool lightly dampened next wax and rub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sound next one of the older execution methods, it will flake off.