To figure out whether or not your wood floors are the end in the manner of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is manage your hand over the wood. If you can character the texture of the grain, the Rubber Flooring Surabaya has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, contaminated in the manner of additives for drying) topped in the manner of wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, in the manner of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish on the Rubber Flooring Surabaya is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are hermetic in the manner of wax. To separate the white spots, use a piece of fine steel wool lightly dampened in the manner of wax and rub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetic in the manner of one of the older completion methods, it will flake off.