To figure out whether or not your wood floors are finished taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is manage your hand beyond the wood. If you can quality the texture of the grain, the Rubber Flooring Victoria has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, impure taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish on the Rubber Flooring Victoria is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after practically 10 to 15 minutes, the floors are sound taking into account wax. To separate the white spots, use a piece of fine steel wool lightly dampened taking into account wax and daub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been sound taking into account one of the older achievement methods, it will flake off.