To figure out whether or not your wood floors are over and done with later than a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is govern your hand exceeding the wood. If you can vibes the texture of the grain, the Rubber Flooring Vs Epoxy has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, mixed later than additives for drying) topped later than wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, later than polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Rubber Flooring Vs Epoxy is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after nearly 10 to 15 minutes, the floors are sound later than wax. To separate the white spots, use a fragment of fine steel wool lightly dampened later than wax and rub gently. The last is if you suspect a varnish or shellac, give a positive response a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sound later than one of the older expertise methods, it will flake off.