To figure out whether or not your wood floors are done past a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is govern your hand exceeding the wood. If you can character the texture of the grain, the Rubber Flooring Yorkshire has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, impure past additives for drying) topped past wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, past polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Rubber Flooring Yorkshire is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after virtually 10 to 15 minutes, the floors are sealed past wax. To separate the white spots, use a fragment of fine steel wool lightly dampened past wax and rub gently. The last is if you suspect a varnish or shellac, undertake a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sealed past one of the older endowment methods, it will flake off.