To figure out whether or not your wood floors are curtains subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction middle suggests these tests: First is govern your hand over the wood. If you can mood the texture of the grain, the Vinyl Flooring Kitchen John Lewis has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, polluted subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish on the Vinyl Flooring Kitchen John Lewis is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are strong subsequent to wax. To cut off the white spots, use a piece of fine steel wool lightly dampened subsequent to wax and daub gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong subsequent to one of the older exploit methods, it will flake off.