To figure out whether or not your wood floors are curtains later than a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is direct your hand greater than the wood. If you can tone the texture of the grain, the Xylene Garage Floor Paint has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, mixed later than additives for drying) topped later than wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, later than polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Xylene Garage Floor Paint is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after more or less 10 to 15 minutes, the floors are hermetically sealed later than wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened later than wax and massage gently. The last is if you suspect a varnish or shellac, take on a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed later than one of the older expertise methods, it will flake off.