To figure out whether or not your wood floors are curtains in the same way as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is run your hand exceeding the wood. If you can environment the texture of the grain, the Zebra Wood Laminate Flooring has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, impure in the same way as additives for drying) topped in the same way as wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, in the same way as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish on the Zebra Wood Laminate Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after practically 10 to 15 minutes, the floors are unquestionable in the same way as wax. To cut off the white spots, use a piece of good steel wool lightly dampened in the same way as wax and smooth gently. The last is if you suspect a varnish or shellac, agree to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been unquestionable in the same way as one of the older deed methods, it will flake off.