To figure out whether or not your wood floors are the end bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is manage your hand higher than the wood. If you can environment the texture of the grain, the Altro Epoxy Resin Flooring has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, polluted bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Altro Epoxy Resin Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective lump has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after nearly 10 to 15 minutes, the floors are sealed bearing in mind wax. To sever the white spots, use a fragment of good steel wool lightly dampened bearing in mind wax and smooth gently. The last is if you suspect a varnish or shellac, agree to a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sealed bearing in mind one of the older achievement methods, it will flake off.