To figure out whether or not your wood floors are finished subsequently a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is manage your hand on top of the wood. If you can environment the texture of the grain, the Aqua Step Bathroom Laminate Flooring has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, mixed subsequently additives for drying) topped subsequently wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, subsequently polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Aqua Step Bathroom Laminate Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after virtually 10 to 15 minutes, the floors are strong subsequently wax. To remove the white spots, use a piece of fine steel wool lightly dampened subsequently wax and daub gently. The last is if you suspect a varnish or shellac, believe a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been strong subsequently one of the older endowment methods, it will flake off.