To figure out whether or not your wood floors are ended like a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion center suggests these tests: First is direct your hand more than the wood. If you can quality the texture of the grain, the Bathroom Laminate Flooring Blue has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, unclean like additives for drying) topped like wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, like polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Bathroom Laminate Flooring Blue is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after virtually 10 to 15 minutes, the floors are sound like wax. To cut off the white spots, use a fragment of good steel wool lightly dampened like wax and smooth gently. The last is if you suspect a varnish or shellac, put up with a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound like one of the older execution methods, it will flake off.