To figure out whether or not your wood floors are ended similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction middle suggests these tests: First is manage your hand exceeding the wood. If you can atmosphere the texture of the grain, the Bathroom Laminate Flooring Underlay has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, polluted similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish on the Bathroom Laminate Flooring Underlay is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are solid similar to wax. To cut off the white spots, use a fragment of good steel wool lightly dampened similar to wax and daub gently. The last is if you suspect a varnish or shellac, undertake a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been solid similar to one of the older achievement methods, it will flake off.