To figure out whether or not your wood floors are ended taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is run your hand more than the wood. If you can mood the texture of the grain, the Bathroom Laminate Flooring Wood Effect has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, mixed taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Bathroom Laminate Flooring Wood Effect is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are strong taking into consideration wax. To separate the white spots, use a piece of fine steel wool lightly dampened taking into consideration wax and massage gently. The last is if you suspect a varnish or shellac, endure a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong taking into consideration one of the older feat methods, it will flake off.