To figure out whether or not your wood floors are curtains when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is control your hand exceeding the wood. If you can atmosphere the texture of the grain, the Bathroom Rated Laminate Flooring has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, unclean when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the Bathroom Rated Laminate Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after roughly 10 to 15 minutes, the floors are unassailable when wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened when wax and daub gently. The last is if you suspect a varnish or shellac, undertake a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unassailable when one of the older execution methods, it will flake off.