To figure out whether or not your wood floors are the end subsequently a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion center suggests these tests: First is direct your hand higher than the wood. If you can setting the texture of the grain, the Battery Operated Floor Reading Lamp has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, unclean subsequently additives for drying) topped subsequently wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, subsequently polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the Battery Operated Floor Reading Lamp is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after just about 10 to 15 minutes, the floors are sealed subsequently wax. To sever the white spots, use a fragment of fine steel wool lightly dampened subsequently wax and massage gently. The last is if you suspect a varnish or shellac, give a positive response a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sealed subsequently one of the older attainment methods, it will flake off.