To figure out whether or not your wood floors are done afterward a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is manage your hand higher than the wood. If you can quality the texture of the grain, the Best Way To Clean Tile Floors Weekly has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, tainted afterward additives for drying) topped afterward wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, afterward polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Best Way To Clean Tile Floors Weekly is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after very nearly 10 to 15 minutes, the floors are unquestionable afterward wax. To remove the white spots, use a piece of fine steel wool lightly dampened afterward wax and massage gently. The last is if you suspect a varnish or shellac, understand a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unquestionable afterward one of the older realization methods, it will flake off.