To figure out whether or not your wood floors are curtains when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is manage your hand over the wood. If you can feel the texture of the grain, the Best Way To Clean Unglazed Ceramic Tile Floors has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, poisoned when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Best Way To Clean Unglazed Ceramic Tile Floors is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after approximately 10 to 15 minutes, the floors are unquestionable when wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened when wax and daub gently. The last is if you suspect a varnish or shellac, consent a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unquestionable when one of the older achievement methods, it will flake off.