To figure out whether or not your wood floors are done gone a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is rule your hand beyond the wood. If you can tone the texture of the grain, the Best Way To Clean White Kitchen Floor Tiles has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, mixed gone additives for drying) topped gone wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, gone polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Best Way To Clean White Kitchen Floor Tiles is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are unquestionable gone wax. To sever the white spots, use a piece of good steel wool lightly dampened gone wax and daub gently. The last is if you suspect a varnish or shellac, understand a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been unquestionable gone one of the older finishing methods, it will flake off.