To figure out whether or not your wood floors are the end taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is rule your hand higher than the wood. If you can vibes the texture of the grain, the Carpet How To Clean Hardwood Floors Before Waxing has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, infected taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish on the Carpet How To Clean Hardwood Floors Before Waxing is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after just about 10 to 15 minutes, the floors are strong taking into consideration wax. To separate the white spots, use a fragment of good steel wool lightly dampened taking into consideration wax and daub gently. The last is if you suspect a varnish or shellac, consent a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been strong taking into consideration one of the older attainment methods, it will flake off.