To figure out whether or not your wood floors are done taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is run your hand higher than the wood. If you can atmosphere the texture of the grain, the Cleaning Tile Floor With Hydrogen Peroxide has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, polluted taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Cleaning Tile Floor With Hydrogen Peroxide is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after roughly 10 to 15 minutes, the floors are sealed taking into account wax. To separate the white spots, use a fragment of good steel wool lightly dampened taking into account wax and massage gently. The last is if you suspect a varnish or shellac, say yes a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sealed taking into account one of the older attainment methods, it will flake off.