To figure out whether or not your wood floors are finished similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is run your hand on top of the wood. If you can atmosphere the texture of the grain, the Floral Shelf Floor Lamp has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, contaminated similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the Floral Shelf Floor Lamp is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after roughly 10 to 15 minutes, the floors are hermetically sealed similar to wax. To surgically remove the white spots, use a fragment of good steel wool lightly dampened similar to wax and rub gently. The last is if you suspect a varnish or shellac, believe a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed similar to one of the older talent methods, it will flake off.