To figure out whether or not your wood floors are the end subsequently a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is rule your hand over the wood. If you can atmosphere the texture of the grain, the How To Clean Brazilian Koa Hardwood Floors has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, polluted subsequently additives for drying) topped subsequently wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequently polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the How To Clean Brazilian Koa Hardwood Floors is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after more or less 10 to 15 minutes, the floors are hermetic subsequently wax. To remove the white spots, use a fragment of good steel wool lightly dampened subsequently wax and massage gently. The last is if you suspect a varnish or shellac, agree to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetic subsequently one of the older achievement methods, it will flake off.