To figure out whether or not your wood floors are over and done with in imitation of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is govern your hand on top of the wood. If you can environment the texture of the grain, the How To Clean Exotic Hardwood Floors has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, contaminated in imitation of additives for drying) topped in imitation of wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, in imitation of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish on the How To Clean Exotic Hardwood Floors is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after very nearly 10 to 15 minutes, the floors are unassailable in imitation of wax. To sever the white spots, use a fragment of fine steel wool lightly dampened in imitation of wax and smear gently. The last is if you suspect a varnish or shellac, undertake a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unassailable in imitation of one of the older triumph methods, it will flake off.