To figure out whether or not your wood floors are finished later a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is run your hand greater than the wood. If you can feel the texture of the grain, the How To Clean Hardwood Floors From Cat Urine has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, polluted later additives for drying) topped later wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, later polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the How To Clean Hardwood Floors From Cat Urine is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective lump has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after practically 10 to 15 minutes, the floors are hermetic later wax. To separate the white spots, use a fragment of fine steel wool lightly dampened later wax and massage gently. The last is if you suspect a varnish or shellac, admit a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been hermetic later one of the older exploit methods, it will flake off.