To figure out whether or not your wood floors are curtains in imitation of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is control your hand on top of the wood. If you can vibes the texture of the grain, the How To Clean Hardwood Floors Naturally has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, unclean in imitation of additives for drying) topped in imitation of wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, in imitation of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the How To Clean Hardwood Floors Naturally is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after virtually 10 to 15 minutes, the floors are sound in imitation of wax. To surgically remove the white spots, use a fragment of good steel wool lightly dampened in imitation of wax and massage gently. The last is if you suspect a varnish or shellac, put up with a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound in imitation of one of the older capability methods, it will flake off.