To figure out whether or not your wood floors are ended subsequently a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is manage your hand greater than the wood. If you can tone the texture of the grain, the How To Clean Hardwood Floors Products has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, tainted subsequently additives for drying) topped subsequently wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequently polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the How To Clean Hardwood Floors Products is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are sound subsequently wax. To remove the white spots, use a piece of fine steel wool lightly dampened subsequently wax and rub gently. The last is if you suspect a varnish or shellac, tolerate a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound subsequently one of the older skill methods, it will flake off.