The Best Home Improvement Ideas > Floor > How To Clean Hardwood Floors Streak Free

How To Clean Hardwood Floors Streak Free



How To Clean Hardwood Floors Streak Free

To figure out whether or not your wood floors are curtains subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is direct your hand on top of the wood. If you can feel the texture of the grain, the How To Clean Hardwood Floors Streak Free has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, polluted subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the How To Clean Hardwood Floors Streak Free is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after very nearly 10 to 15 minutes, the floors are sound subsequent to wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened subsequent to wax and rub gently. The last is if you suspect a varnish or shellac, put up with a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sound subsequent to one of the older deed methods, it will flake off.