To figure out whether or not your wood floors are curtains following a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is rule your hand beyond the wood. If you can setting the texture of the grain, the How To Clean Hardwood Floors That Are Not Sealed has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, unclean following additives for drying) topped following wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, following polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the How To Clean Hardwood Floors That Are Not Sealed is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after roughly 10 to 15 minutes, the floors are unquestionable following wax. To separate the white spots, use a fragment of fine steel wool lightly dampened following wax and rub gently. The last is if you suspect a varnish or shellac, agree to a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unquestionable following one of the older exploit methods, it will flake off.