To figure out whether or not your wood floors are ended later than a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is control your hand higher than the wood. If you can quality the texture of the grain, the Laminate Plank Flooring In Bathroom has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, dirty later than additives for drying) topped later than wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, later than polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Laminate Plank Flooring In Bathroom is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are hermetically sealed later than wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened later than wax and smear gently. The last is if you suspect a varnish or shellac, receive a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed later than one of the older carrying out methods, it will flake off.