To figure out whether or not your wood floors are done taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction middle suggests these tests: First is control your hand more than the wood. If you can atmosphere the texture of the grain, the Porcelain Flooring At Home Depot has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, unclean taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Porcelain Flooring At Home Depot is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after just about 10 to 15 minutes, the floors are hermetically sealed taking into consideration wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened taking into consideration wax and smooth gently. The last is if you suspect a varnish or shellac, take a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed taking into consideration one of the older execution methods, it will flake off.