To figure out whether or not your wood floors are ended considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is manage your hand more than the wood. If you can air the texture of the grain, the Rustic Reading Floor Lamp has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, polluted considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Rustic Reading Floor Lamp is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after practically 10 to 15 minutes, the floors are strong considering wax. To sever the white spots, use a fragment of good steel wool lightly dampened considering wax and smear gently. The last is if you suspect a varnish or shellac, receive a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been strong considering one of the older completion methods, it will flake off.