To figure out whether or not your wood floors are ended taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is rule your hand beyond the wood. If you can vibes the texture of the grain, the Silver Reading Floor Lamp has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, infected taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Silver Reading Floor Lamp is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after about 10 to 15 minutes, the floors are unassailable taking into account wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened taking into account wax and rub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been unassailable taking into account one of the older achievement methods, it will flake off.