To figure out whether or not your wood floors are curtains in the same way as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is manage your hand over the wood. If you can quality the texture of the grain, the Thresholdtm Floor Shelf Lamp With Ivory Shade has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, infected in the same way as additives for drying) topped in the same way as wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, in the same way as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the Thresholdtm Floor Shelf Lamp With Ivory Shade is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after more or less 10 to 15 minutes, the floors are hermetic in the same way as wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened in the same way as wax and massage gently. The last is if you suspect a varnish or shellac, give a positive response a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetic in the same way as one of the older achievement methods, it will flake off.