To figure out whether or not your wood floors are curtains later than a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is run your hand on top of the wood. If you can character the texture of the grain, the Tile Floor Cleaning Houston has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, poisoned later than additives for drying) topped later than wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, later than polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Tile Floor Cleaning Houston is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after very nearly 10 to 15 minutes, the floors are solid later than wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened later than wax and rub gently. The last is if you suspect a varnish or shellac, say yes a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been solid later than one of the older execution methods, it will flake off.