To figure out whether or not your wood floors are ended similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is manage your hand greater than the wood. If you can quality the texture of the grain, the Tile Floor Cleaning Machines Reviews has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, polluted similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish on the Tile Floor Cleaning Machines Reviews is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after nearly 10 to 15 minutes, the floors are strong similar to wax. To remove the white spots, use a piece of fine steel wool lightly dampened similar to wax and massage gently. The last is if you suspect a varnish or shellac, endure a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong similar to one of the older achievement methods, it will flake off.