To figure out whether or not your wood floors are done like a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation center suggests these tests: First is direct your hand greater than the wood. If you can vibes the texture of the grain, the Tile Floor Cleaning Newport Beach Ca has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, dirty like additives for drying) topped like wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, like polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Tile Floor Cleaning Newport Beach Ca is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are hermetic like wax. To separate the white spots, use a piece of good steel wool lightly dampened like wax and massage gently. The last is if you suspect a varnish or shellac, consent a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been hermetic like one of the older exploit methods, it will flake off.