To figure out whether or not your wood floors are finished subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is rule your hand higher than the wood. If you can mood the texture of the grain, the Tile Floor Cleaning With Vinegar has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, dirty subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Tile Floor Cleaning With Vinegar is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after practically 10 to 15 minutes, the floors are solid subsequent to wax. To sever the white spots, use a piece of good steel wool lightly dampened subsequent to wax and daub gently. The last is if you suspect a varnish or shellac, agree to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been solid subsequent to one of the older exploit methods, it will flake off.