To figure out whether or not your wood floors are done past a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is manage your hand more than the wood. If you can vibes the texture of the grain, the Wallace Warsaw Reading Floor Lamp Chrome has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, dirty past additives for drying) topped past wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, past polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Wallace Warsaw Reading Floor Lamp Chrome is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are unassailable past wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened past wax and smooth gently. The last is if you suspect a varnish or shellac, allow a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unassailable past one of the older success methods, it will flake off.