To figure out whether or not your wood floors are the end with a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is manage your hand higher than the wood. If you can atmosphere the texture of the grain, the What Is Best Way To Clean Porcelain Tile Floors has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, unclean with additives for drying) topped with wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, with polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish on the What Is Best Way To Clean Porcelain Tile Floors is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after just about 10 to 15 minutes, the floors are solid with wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened with wax and smooth gently. The last is if you suspect a varnish or shellac, take a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been solid with one of the older triumph methods, it will flake off.