To figure out whether or not your wood floors are curtains bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is manage your hand beyond the wood. If you can atmosphere the texture of the grain, the What Is The Best Way To Clean Marble Tile Floors has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, tainted bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the What Is The Best Way To Clean Marble Tile Floors is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after approximately 10 to 15 minutes, the floors are sealed bearing in mind wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened bearing in mind wax and massage gently. The last is if you suspect a varnish or shellac, say you will a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been sealed bearing in mind one of the older ability methods, it will flake off.