To figure out whether or not your wood floors are ended afterward a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is control your hand more than the wood. If you can atmosphere the texture of the grain, the Best Hardwood Floors For Living Rooms has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, tainted afterward additives for drying) topped afterward wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, afterward polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Best Hardwood Floors For Living Rooms is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after approximately 10 to 15 minutes, the floors are sealed afterward wax. To sever the white spots, use a fragment of good steel wool lightly dampened afterward wax and smooth gently. The last is if you suspect a varnish or shellac, put up with a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sealed afterward one of the older realization methods, it will flake off.