To figure out whether or not your wood floors are over and done with taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is direct your hand over the wood. If you can atmosphere the texture of the grain, the Eternity Flooring Antique Cocoa has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, tainted taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish on the Eternity Flooring Antique Cocoa is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after virtually 10 to 15 minutes, the floors are sealed taking into account wax. To cut off the white spots, use a fragment of good steel wool lightly dampened taking into account wax and smooth gently. The last is if you suspect a varnish or shellac, give a positive response a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been sealed taking into account one of the older execution methods, it will flake off.