To figure out whether or not your wood floors are over and done with once a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is govern your hand over the wood. If you can quality the texture of the grain, the Eternity Flooring Cabana has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, infected once additives for drying) topped once wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, once polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Eternity Flooring Cabana is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after about 10 to 15 minutes, the floors are sealed once wax. To cut off the white spots, use a piece of fine steel wool lightly dampened once wax and smear gently. The last is if you suspect a varnish or shellac, say yes a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sealed once one of the older achievement methods, it will flake off.