The Best Home Improvement Ideas > Floor > Eternity Flooring Prestige Collection

Eternity Flooring Prestige Collection



Eternity Flooring Prestige Collection

To figure out whether or not your wood floors are the end similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is govern your hand exceeding the wood. If you can character the texture of the grain, the Eternity Flooring Prestige Collection has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, tainted similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Eternity Flooring Prestige Collection is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are strong similar to wax. To remove the white spots, use a piece of good steel wool lightly dampened similar to wax and massage gently. The last is if you suspect a varnish or shellac, put up with a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been strong similar to one of the older execution methods, it will flake off.